Pulverizers Troubleshooting and Maintenance
- Categories:Industry Trends
- Author:
- Origin:
- Time of issue:2015-07-17
- Views:0
(Summary description)Pulverizersoremillingmachineryhasalwaysbeenthemostpopularkindofmodel,itsqualityandextremelyresistanttoultra-highperformancehasalwaysbeenthemajorityofcustomersdeeplylovedtheplace.Buteventhenthemachinew
Pulverizers Troubleshooting and Maintenance
(Summary description)Pulverizersoremillingmachineryhasalwaysbeenthemostpopularkindofmodel,itsqualityandextremelyresistanttoultra-highperformancehasalwaysbeenthemajorityofcustomersdeeplylovedtheplace.Buteventhenthemachinew
- Categories:Industry Trends
- Author:
- Origin:
- Time of issue:2015-07-17
- Views:0
Information
Pulverizers ore milling machinery has always been the most popular kind of model, its quality and extremely resistant to ultra-high performance has always been the majority of customers deeply loved the place. But even then the machine will have to strike a rugged day, once pulverizers fails to identify the reasons must be stopped, can not be forced to start, to avoid danger. The following are pulverizers common faults and repair methods:
First, the finished material is too thick or too thin
1. Analyze afford grading blade wear serious role.
Workaround: may be appropriate maintenance, such as replacement of badly worn blades.
2. The fan flow inappropriate.
Solution: According to the actual needs of the air volume can be adjusted.
3. Analysis of machine speed inappropriate.
Solution: Adjust the analytical engine speed.
Second, low no less flour or flour yield
1. The lock powder device is not adjusted, resulting in pink Mifengbuyan suck.
Solution: Check and adjust the lock sealing powder was found to be blocked at the leak.
2. material shovel blade wear and can not afford.
Solution: Replace the new blade and roller, magic ring.
Third, the host noisy and have greater vibration
1. Enter the small quantity or a different host and the transmission shaft, with no gap between the two couplings, anchor bolts loose.
Solution: Adjust the feeding amount, coaxial alignment, adjusting the gap between the two coupling.
2. The expected impact of large or non-hard material layers.
Solution: control the feed hardness and feeder feed rate.
3, roller grinding ring round seriously deformed.
Solution: replace the roller and grinding ring.
Fourth, the fan vibration
Accumulated powder or worn blades 1. unbalanced.
Workaround: Clean or replace the blade leaves accumulated powder.
2. bolt loose.
Solution: tighten the anchor bolts.
Scan the QR code to read on your phone
Add： No.56, Beiyi West Road, Tiexi District, Shenyang City, Liaoning Province
PC： 110021
Tel： +86-24-25175335
E-mail：szdz999@126.com
Website：www.syzxdz.cn
